GM Corvette 1984-1996 Repair Guide
Distributor
REMOVAL & INSTALLATION
REMOVAL & INSTALLATION
See Figures 1, 2, 3, 4 and 5
For 1995-96 vehicles, inspect the distributor ventilation system for proper ventilation.
1.
Be sure the ignition is in the
OFF
or
LOCK
position. Disconnect the negative battery cable.
2.
Detach the Intake Air Temperature (IAT) electrical connector.
3.
Remove the air intake duct.
4.
Fig. Fig. 1: Unfasten the retainers, then remove the air intake duct
Remove the accessory drive belt, as outlined in General Information & Maintenance of this repair guide.
5.
Drain the engine cooling system into a suitable container.
6.
Disconnect the water pump coolant hoses, and allow any remaining coolant to drain.
7.
Detach the Engine Coolant Temperature (ECT) sensor electrical connector.
8.
1992 Chevrolet Corvette 5.7L SFI OHV 8cyl
1 of 4
8/11/2010 1:24 PM
