Chevrolet/GMC Silverado/Sierra eAssist Supplement (GMNA-Localizing-U.S./
Canada-9761994) - 2016 - CRC - 2/22/16
10
Instruments and Controls
Cluster Menu
The eAssist vehicles have an
additional item in the Settings menu.
Settings
Press
V
to select the Settings app.
Use
w
or
x
to scroll through items
in the Settings menu.
Jump Start :
The Jump Start
display is used to perform an
on-board jump start for eAssist
vehicles. See
“
Jump Starting
(On-board with eAssist Only)
”
in the
Index.
Tachometer
The tachometer displays the engine
speed in revolutions per
minute (rpm).
For eAssist vehicles, when the
ignition is in ON/RUN, the
tachometer indicates the vehicle
status. When pointing to AUTO
STOP, the engine is off but the
vehicle is on and can move. The
engine could auto start at any time.
When the indicator points to OFF,
the vehicle is off.
When the engine is on, the
tachometer will indicate the engine
’
s
revolutions per minute (rpm). The
tachometer may vary by several
hundred rpm
’
s, during auto stop
mode, when the engine is shutting
off and restarting.
A slight bump may be felt when the
transmission is determining the
most fuel efficient operating range.
Caution
If the engine is operated with the
rpm
’
s in the warning area at the
high end of the tachometer, the
vehicle could be damaged, and
the damage would not be covered
by the vehicle warranty. Do not
operate the engine with the rpm
’
s
in the warning area.
Information Displays
Power Flows
To view the Power Flow screens in
the infotainment display, press
the
[
button on the Home screen.
Then press the FLOW button at the
bottom of the touch screen. These
screens indicate the current
operating condition and the energy
flow between the engine, generator,
and high voltage battery.
Auto Stop - Vehicle is stationary
with battery active and no power is
flowing to the wheels.
