background image

16

Carefully read the entire Instruction Manual 

before using this product.

Before returning this product for a Warranty Claim or any other reason

 

Please Call 1300 880 001 (Australia) or 0800 445 721 (New Zealand)

When you make your call, please have the following information at hand: 

    

GMC Product Type 

 

    

GMC Product Code

GMC 

Service Engineer will take your call and, in most cases, will be able to solve your problem over the phone. 

You are welcome to use this phone-in service to make suggestions or give comments about any GMC product.
With continuing product development changes may have occurred which render the product received slightly 
different to that shown in this instruction manual. 
The manufacturer reserves the right to change specifications without notice. 

Note: 

Specifications may differ from country to country.

      

Helpline 1300 880 001 (Australia) or 0800 445 721 (New Zealand)

Register your warranty on line at www.gmcompany.com 

and enter your receipt details. 

The 

GMC 777 

Helpline operates from

 7am 

to

 7pm, 7 days a week (EST). 

This allows you to contact 

GMC 

directly with any queries 

and technical questions you have regarding products.

Save this Manual for future reference

GMC Head Office:

45-55 South Centre Road, Melbourne Airport, Victoria, Australia 3045
Telephone (03) 8346 1100 Fax (03) 8346 1200

Содержание BJ110M

















Отзывы:

Похожие инструкции для BJ110M