Cadillac XT5 Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-
16406251) - 2023 - CRC - 3/25/22
282
Driving and Operating
.
If ACC is holding the vehicle
at a stop and there is
another vehicle directly
ahead, pressing RES+ will
increase the set speed.
.
Pressing RES+ when there is
no longer a vehicle ahead or
the vehicle ahead is pulling
away and the brake is not
applied will cause the ACC to
resume.
When it is determined there is
no vehicle ahead or the vehicle
ahead is beyond the selected
following gap, then the vehicle
speed will increase to the set
speed.
The speedometer reading can
be displayed in either English
or metric units. See
Instrument Cluster
122. The
increment value used depends
on the units displayed.
Reducing Speed While ACC is
at a Set Speed
If ACC is already activated, do
one of the following:
.
Use the brake to get to the
desired lower speed.
Release the brake and press
SET
–
. The vehicle will now
cruise at the lower speed.
.
Press and hold SET
–
until
the desired lower speed is
displayed, then release it.
.
To decrease speed in
smaller increments, press
SET
−
to the first detent. For
each press, the vehicle goes
1 km/h (1 mph) slower.
.
To decrease speed in larger
increments, press SET
−
to
the second detent. For each
press, the vehicle speed
decreases to the next
5 km/h (5 mph) mark on the
speedometer.
The set speed can also be
decreased while the vehicle is
stopped.
.
If stopped with the brake
applied, press or hold SET
−
until the desired set speed is
displayed.
Selecting the Follow
Distance Gap
When a slower moving vehicle
is detected ahead within the
selected following gap, ACC
will adjust the vehicle's speed
and attempt to maintain the
follow distance gap selected.
Press
[
on the steering
wheel to adjust the following
gap. Each press cycles the gap
button through three settings:
Far, Medium, or Near.
When pressed, the current
gap setting displays briefly on
the instrument cluster and
HUD (if equipped). Subsequent
presses cycle the gap button
through three settings: Far,
Medium, or Near. The gap
setting will be maintained until
it is changed.
Since each gap setting
corresponds to a following
time (Far, Medium, or Near),
the following distance will vary
based on vehicle speed. The
faster the vehicle speed, the