GMC Yukon Denali/Yukon XL Denali Owner Manual (GMNA-Localizing-U.S./
Canada/Mexico-9159308) - 2016 - crc - 6/2/15
In Brief
9
7
:
Press and release to initiate
vehicle locate. The turn signal
lamps flash and the horn sounds
three times.
Press
7
and hold for more than
three seconds to sound the panic
alarm.
Press
7
again to cancel the panic
alarm.
See
Keys
0
25
and
Remote Keyless
Entry (RKE) System
0
26
.
Remote Vehicle Start
If equipped, the engine can be
started from outside of the vehicle.
Starting the Vehicle
1. Press and release
Q
on the
RKE transmitter.
2. Immediately, press and hold
/
for at least four seconds or until
the turn signal lamps flash.
3. Start the vehicle normally after
entering.
When the vehicle starts, the parking
lamps will turn on.
Remote start can be extended.
Canceling a Remote Start
To cancel a remote start, do one of
the following:
.
Press and hold
/
until the
parking lamps turn off.
.
Turn on the hazard warning
flashers.
.
Turn the vehicle on and then off.
See
Remote Vehicle Start
0
33
.
Door Locks
To lock or unlock the doors from
inside the vehicle:
.
Press
Q
or
K
on a power door
lock switch.
.
Pushing down the manual lock
knob on the driver door will lock
all doors. Pushing down the lock
knob on a passenger door will
lock that door only.
.
Pulling the door handle once will
unlock that door. Pulling the
handle again will unlatch it.
To lock or unlock the doors from
outside the vehicle press
Q
or
K
on
the RKE transmitter. See
Remote
Keyless Entry (RKE) System
Operation
0
27
.
Power Door Locks
Q
:
Press to lock the doors.
K
:
Press to unlock the doors.
See
Door Locks
0
34
.
Keyless Access
If equipped with Keyless Access,
the RKE transmitter must be within
1 m (3 ft) of the driver door.