GMC 2013 GMC Savana, Руководство пользователя

Страница: 180 / 398

Black plate (26,1)
GMC Savana Owner Manual - 2013 - 2nd Edition - 9/25/12
7-26 Infotainment System
Using the “ Re-dial ” Command
1. Press and hold
b
/
g
for
two seconds.
2. After the tone, say “ Re-dial. ”
Once connected, the person called
will be heard through the audio
speakers.
Receiving a Call
When an incoming call is received,
the audio system mutes and a ring
tone is heard in the vehicle.
. Press
b
/
g
to answer the call.
. Press
c
/
x
to ignore a call.
Call Waiting
Call waiting must be supported on
the cell phone and enabled by the
wireless service carrier.
. Press
b
/
g
to answer an
incoming call when another call
is active. The original call is
placed on hold.
. Press
b
/
g
again to return to
the original call.
. To ignore the incoming call, no
action is required.
. Press
c
/
x
to disconnect the
current call and switch to the call
on hold.
Three-Way Calling
Three-way calling must be
supported on the cell phone and
enabled by the wireless service
carrier.
1. While on a call, press
b
/
g
.
2. Say “ Three-way call. ”
3. Use the dial or call command to
dial the number of the third party
to be called.
4. Once the call is connected,
press
b
/
g
to link all callers
together.
Ending a Call
Press
c
/
x
to end a call.
Muting a Call
During a call, all sounds from inside
the vehicle can be muted so that the
person on the other end of the call
cannot hear them.
. To mute a call, press
b
/
g
, and
then say “ Mute call. ”
. To cancel mute, press
b
/
g
,
and then say “ Un-mute call. ”
Transferring a Call
Audio can be transferred between
the Bluetooth system and the cell
phone.
The cell phone must be paired and
connected with the Bluetooth
system before a call can be
transferred. The connection process
can take up to two minutes after the
ignition is turned to ON/RUN.