GMC 2012 Tahoe, Руководство пользователя

Страница: 63 / 100

Black plate (15,1)
Chevrolet Tahoe and GMC Yukon/Yukon Denali Hybrid - 2012
Vehicle Care 10-15
Taillamps, Turn Signal,
Stoplamps, and Back-Up
Lamps
A. Taillamp/Stoplamp
B. Back-up Lamp
C. Turn Signal Lamp
D. Sidemarker Lamp
If the taillamp/stoplamp (A) needs to
be replaced, see your dealer.
1. Open the liftgate. See “ Power
Liftgate ” in the owner manual.
2. Remove the two screws from the
taillamp assembly.
3. Pull the taillamp assembly
rearward disengaging the two
outer pins on the taillamp
assembly from the vehicle.
4. Turn the bulb socket
counterclockwise to remove it
from the taillamp assembly.
5. Pull the old bulb straight out
from the bulb socket.
6. Press a new bulb into the bulb
socket and insert it into the
taillamp assembly. Turn the
bulb socket clockwise into the
taillamp assembly until it clicks.
7. Reinstall the taillamp assembly.
When reinstalling, make sure to
line up the pins on the taillamp
assembly with the vehicle.
If this is not done the taillamp
assembly cannot be correctly
installed.
Replacement Bulbs
Exterior Lamp
Bulb
Number
Back-up Lamp and
Rear Turn
Signal Lamp
3156
Sidemarker Lamp 194
For replacement bulbs not listed
here, contact your dealer.