GMC 2011 Sierra Denali, Руководство пользователя

Страница: 242 / 492

7-54 Infotainment System
Making a Call
Calls can be made using the following commands.
Command Usage
Dial or Call The dial or call command can be used
interchangeably to dial a phone number or
a stored name tag.
Digit Dial This command allows a phone number to
be dialed by entering the digits one at
a time.
Re ‐ dial This command is used to dial the last
number used on the cell phone.
Using the “ Dial ” or “ Call ”
Command
1. Press and hold
b g
for
two seconds.
2. Say “ Dial ” or “ Call. ”
3. Say the entire number without
pausing, or say the name tag.
Once connected, the person called
will be heard through the audio
speakers.
Using the “ Digit Dial ” Command
The digit dial command allows a
phone number to be dialed by
entering the digits one at a time.
After each digit is entered, the
system repeats back the digit it
heard followed by a tone.
If an unwanted number is
recognized by the system, say
“ Clear ” at any time to clear the last
number.
To hear all of the numbers
recognized by the system, say
“ Verify ” at any time.
1. Press and hold
b g
for
two seconds.
2. Say “ Digit Dial. ”
3. Say each digit, one at a time,
that you want to dial. After each
digit is entered, the system
repeats back the digit it heard
followed by a tone. After the
last digit has been entered,
say
“ Dial. ”
Once connected, the person called
will be heard through the audio
speakers.