GMC 2010 GMC Yukon/Yukon XL, Руководство пользователя

Страница: 344 / 614

Using the Re ‐ dial Command
1. Press and hold
b g
for two seconds. The system
responds with “ Ready ” followed by a tone.
2. After the tone, say “ Re ‐ dial ” . The system responds
with “ Re ‐ dial using <phone name> ” and dials the
last number called from the connected Bluetooth
phone.
Once connected, the person called will be heard
through the audio speakers.
Receiving a Call
When an incoming call is received, the audio system
mutes and a ring tone is heard in the vehicle.
. Press
b g
and begin speaking to answer the call.
. Press
c x
to ignore a call.
Call Waiting
Call waiting must be supported on the Bluetooth phone
and enabled by the wireless service carrier to work.
. Press
b g
to answer an incoming call when
another call is active. The original call is placed
on hold.
. Press
b g
again to return to the original call.
. To ignore the incoming call, continue with the
original call with no action.
. Press
c x
to disconnect the current call and
switch to the call on hold.
4-122