GMC 2010 GMC Sierra, Руководство пользователя

Страница: 169 / 660

P (Park): This position locks the rear wheels. It is the
best position to use when starting the engine because
the vehicle cannot move easily. When parked on a hill,
especially when the vehicle has a heavy load, you
might notice an increase in the effort to shift out of
P (Park). See Torque Lock (Automatic Transmission)
under
Shifting Into Park on page 3 ‑ 55 for more
information.
{
WARNING:
It is dangerous to get out of the vehicle if the shift
lever is not fully in P (Park) with the parking brake
firmly set. The vehicle can roll.
Do not leave the vehicle when the engine is
running unless you have to. If you have left the
engine running, the vehicle can move suddenly.
You or others could be injured. To be sure the
vehicle will not move, even when you are on fairly
level ground, always set the parking brake and
move the shift lever to P (Park). See
Shifting Into
Park on page 3 ‑ 55 . If you are pulling a trailer,
see Towing a Trailer on page 5 ‑ 55 .
{
WARNING:
If you have Four-Wheel Drive, the vehicle will be
free to roll
— even if the shift lever is in
P (Park) — if the transfer case is in Neutral. So, be
sure the transfer case is in a drive gear,
Two-Wheel Drive High or Four-Wheel Drive High
or Four-Wheel Drive Low
— not in Neutral. See
Shifting Into Park on page 3 ‑ 55 .
R (Reverse): Use this gear to back up.
Notice: Shifting to R (Reverse) while the vehicle is
moving forward could damage the transmission.
The repairs would not be covered by the vehicle
warranty. Shift to R (Reverse) only after the vehicle
is stopped.
To rock the vehicle back and forth to get out of snow,
ice, or sand without damaging the transmission, see
If
Your Vehicle is Stuck in Sand, Mud, Ice, or Snow on
page 5
‑ 31 .
3-31