Getting to Know Your Yukon/Yukon Denali
20
The 2nd-row seats fold and tumble to
provide more cargo space and access to
the 3rd-row seats.
To fold and tumble the seat:
1. Make sure nothing is under or in front
of the seat.
2. Fold the seatback forward by lifting
the release lever located at the
bottom rear of the seatback on the
outboard side of the seat.
3. Tumble the seat forward by lifting the
release lever again.
To unfold the seat:
1. Pull down the seat until it latches to
the floor.
2. Lift up the seatback until it locks in
place. Pull on the seatback to make
sure it is locked.
Power Release Seats (if equipped)
To fold and tumble the power release
seat:
1. Shift the vehicle into Park.
2. Make sure nothing is under or in front
of the seat.
3. Press one of
the automatic
release but-
tons, located
on the over-
head console
and on the panel behind the rear
doors. The seat will fold and tumble
forward automatically.
The seat must be unfolded manually to
return it to the sitting position.
See Section 1 of your Owner Manual.
The split rear seats fold and tumble to
provide more cargo space.
To fold and tumble the seat:
1. Make sure nothing is in front of the
seat.
2. Fold the seatback forward by lifting
the release lever (A) located at the
bottom rear of the seatback on the
outboard side of the seat.
3. Tumble the seat forward by lifting the
release lever (B) located to the left of
the handle on the center rear of the
seat.
4. Tilt the seat fully forward and lock it
in place.
To unfold the seat:
1. Lower the seat by lifting the release
lever located to the left of the handle
on the center rear of the seat.
Folding 3rd-Row Seats
B
A
Folding 2nd-Row Seats
Yukon Yukon Denali 2008 A 5/1/07 12:15 PM Page 20
