GMC 2004 safari, Руководство пользователя

Страница: 264 / 394

8. Now connect the black
negative (
−
) cable to
the negative (
−
)
terminal of the good
battery. Use a remote
negative (
−
) terminal
if the vehicle has
one. Don’t let the other
end touch anything
until the next step.
The other end of the negative (
−
) cable does not
go to the dead battery. It goes to a heavy,
unpainted metal engine part, or to a remote
negative (
−
) terminal on the vehicle with the dead
battery.
9. Connect the other end of the negative (
−
) cable at
least 18 inches (45 cm) away from the dead battery,
but not near engine parts that move. The electrical
connection is just as good there, and the chance
of sparks getting back to the battery is much less.
10. Now start the vehicle with the good battery and run
the engine for a while.
11. Try to start the vehicle with the dead battery. If it
won’t start after a few tries, it probably needs
service.
Notice: If the jumper cables are removed in the
wrong order, electrical shorting may occur and
damage the vehicle. The repairs would not be
covered by your warranty. Remove the jumper
cables in the correct order, making sure that the
cables do not touch each other or other metal.
5-48