AVANT
Cod. 21194-04 5
5.- INSTALLATION AND START-UP
5.1.- ELECTRICAL INSTALLATION
•
Ensure mains connection is 230 VAC, 50 Hz and 10 A, with a socket with
grounding (same type as machine plug).
•
Installation should meet Low Voltage Installation Regulations.
•
Once you have installed the machine, check the effectiveness of the
ground connection.
5.2.- LEVELLING
•
Once the machine has been placed in its final
location, adjust the legs until it is completely
stable.
5.3.- START-UP
•
Connect the machine to mains and press
the main switch. The machine will carry
out an internal check and finally the
selection buttons appear.
•
Once the machine has been started-up, before disconnecting the
machine from mains, press the main switch to off and wait at least 40
seconds.
•
In order to switch the machine on again, this should stay at least 40
seconds off.
5.4.- RELATIONSHIP PRODUCT CHANNEL/SELECTIONS
•
The Avant machines, have a selection touch screen.
•
When loading product, note the relationship between product channels
and selection buttons.
•
All machines have a label where the relationship between product
channels and selection buttons are indicated.
•
If the machine has more selection buttons than product channels, you
will need to combine product channels. (See Chapter 01.19 of the
programming options.).
•
When loading the tobacco check that the packets are not stuck to one
another.