BEFORE YOU START:
Download GM’s LUXcontrol™ app from the App Store or
Google® Play. Or, scan the QR code for auto
download. We will guide you through programming
after we help you install your dimmer.
KEY SPECIFICATIONS
Color: White
Electrical Rating: 100-240V AC
Rated Current: 3A
Working Temp: -4°F – 120°F / -20°C – 50°C
Wi-Fi Frequency: 2.4Ghz only
Max. Output: 300W INC – 150W LED
SYSTEM REQUIREMENTS
Existing Wi-Fi 2.4GHz Network
Existing single pole circuit and outlet box
with neutral wire
Mobile device running IOS® 10.0 or higher,
Android™ 8.0 and above
GM Lighting LUXcontrol™ App (see ‘Before You Start’)
DIMMER INSTALLATION:
The SHWD is a dimmable LED dimmer that is designed to
replace a standard light switch using existing wiring. The
SHWD provides a wide dimming range and is suitable for
multi-gang installations. All dimmers can be controlled via
the LUXcontrol app.
Turn the POWER OFF at the circuit breaker before
installing the dimmer. Read and understand these
instructions before installing. This device is intended
for installation pursuant to National Electric Code and
local regulations. We recommend that you use a
qualified electrician or electrical contractor to install.
WIRING and PROGRAMMING DIRECTIONS
1.
Remove existing wall switch (
FIG. 1
)
2.
Mount SHWD dimmer so that RE-SET switch is on
bottom (
FIG. 2
)
3.
Connect the 120V power wire to the BLACK wire on
the SHWD dimmer (
FIG. 3
)
4.
Connect the neutral wire WHITE to the WHITE wire on
the SHWD dimmer (
FIG. 3
)
5.
Connect the brown wire to the load wire (light) (
FIG. 3
)
6.
Connect GREEN wire on the SHWD dimmer to ground
7.
Push dimmer into place making sure that wires are
securely connected and screw to outlet box (
FIG. 4
)
8.
Wall plate clips onto SHWD dimmer, locking securely
in place (
FIG. 5
). Also can accomodate std. Decora plates.
FIG. 1
FIG. 2
FIG. 3
FIG. 4
FIG. 5
Wall Outlet
