5. LOW, MID, HIGH
Use these controls to boost or cut the low, mid and high frequency levels by ±12dB.
6. LIMIT LED
The built-in limiter limits harsh, transient peaks and evens out the bass guitar signal. The LED indicates when the limiter
circuit is activated.
7. MASTER
Use this control to adjust the output level of the amplifier.
8. AUX IN (RCA)
Use this input to connect a CD-player, drum machine, etc.
9. LINE OUT (1/4”)
Use this jack to connect line output.
10. HEADPHONE OUTPUT (1/4”)
Use this jack to connect headphones.
11. POWER LED
This LED indicates when the amplifer is turned on.
12. POWER SWITCH
Use this switch to turn the amplifier on/off.
REAR PANEL
13. SOCKET
SPECIFICATIONS
Input sensitive / impedance:
-20dBu / 1MΩ (@1KHz)
Output (RMS):
35W / 4Ohm
Speaker:
1x10”
Connections:
input (1/4”)
aux in (RCA)
headphones (1/4”)
line out (1/4”)
EQ:
3-band EQ: low, mid, high
±12dB
Power Supply:
240V~50Hz
Net weight:
14.5kg
Dimensions:
416x320x452mm
*** appearance and specifications are subject to change without notice – E&OE ***
