8
Color T; IP Address; Language; Date Save
2.2.1 Product
Please select correct relative parameters of the product under the Product Option
Port:
Select a connecting controller port.
Series:
Select a style of the product.
Cut Signal:
Cut or link the transmission signal of the VSP-F2L4 controller.
Test Mode:
Test and check the color of the LED screen.
DMX512 on/off:
Please select OFF if there is no DMX512 signal input to the
controller.
Mirror:
Set mirror image display effect for LED screen.
Drive IC:
Choose correct LED drive IC in your LED panel.
LED PIN1~LED PIN3:
Define the pins color of LED lamp to avoid the display color
exchanged.
IN MODE:
The mode of display card. Limit range means HDMI 0-235 level gray
mode, Full range means DVI 0-255 gray mode, the default mode is full range.
2.2.2 Spec (Adjust and set the parameters of LED screen)
Bright
（
Brightness
）：
Adjust the brightness of LED screen, such as the steps of adjust
brightness:
Input DVI 1920×1080 P 60
Output
1024×768 P60
Brightness
70
IC MBI5041
CYSN39
IP 192. 168. 0.6
Function
Product
> Spec
Address
Function
# Bright
60
X Start
0
Y Start
0
Then
rotate the control knob to adjust the brightness level, and click the SEND/DVI to send,
at last save your setting in the save menu.
Press SETUP/HDMI to enter the parameter
setting mode, and rotate the control knob to
select the Spec. Option.
Press SEL/SDI1 to enter the parameter and rotate the
control knob to select the Bright, then press the
SEL/SDI1 key to enter, you can see the symbol #.
