26
Appendix 1 Signal output cutting method of VSD-F2L4
controller (Important)
There are four serial network signal (OUT1~OUT4
，
represented by A, B, C, D)
and two serial optical fiber signal (OUT1~OUT2) for VSP-F2L4 controller. A, B, C,
D
The first optical fiber output signal equates the sum of network OUT1 and OUT2
output signal, that is, signal A and signal B. The second optical fiber output signal
equates the sum of network OUT3 and OUT4 output signal, that is, signal C and
signal D.
The maximum output resolution is 1920x1080 of the controller. The input video
signal can be horizontal segmentation or vertical segmentation according your setting.
For specific principles, please see the following introduction. Please select proper way
according to the screen size and some other conditions.
Signal Horizontal Segmentation of VSP-F2L4 controller
(Applicable to all products)
Horizontal Segmentation means that the signal is divided into four parts from top
to bottom, through the controller’s signal output port (OUT1~OUT4) as shown above.
The size of the display area is the same for each output port.
Assuming that the LED screen pixel resolution is Wx
×
Hy, Wx is horizontal pixel size, Hy is
vertical pixel size, as shown below:
