Glutz SD-L F 9365 Series, Монтаж и эксплуатация

Страница: 55 / 112

SD‑L F (9365x)
0548-988-11---20_2022.01.indd
Display
Joystick


0548-988/12
Page 55 of 87
Mounting and operating instructions
7.3 Operating modes
The following operating modes can be enabled by means of the program selector:
AUTOMATIC
Automatic opening via the opening elements inside/o Key.
Automatic closing upon expiration of the adjustable hold-open time.
NIGHT
The door leaf can only be opened via the opening element Key (key-operated
siwtch outside).
OPEN
The door leaf is automatically opened and remains in the OPEN position.
MANUAL
The drive mechanism and the control elements are switched off.
The door leaf can be manually opened.
The door leaf is closed by spring power from any position (Invers = spring
opening, unless the door leaf has not been locked).
EXIT
The door leaf can only be opened via the opening elements inside and Key.
+
Teach-in procedure (Teach)
Completely close the door leaf (Invers = open). Hold the keys MANUAL and
EXIT simultaneously depressed (during at least 5 seconds). All the pending
errors will be deleted and a teach-in procedure (Teach) is carried out.
scroll
change
7.4 Adjustings
The parameters can be changed on the
control unit by means of the display and the
joystick.
The movements of the joystick have the
following effects:
• Vertical joystick movement (upward/downward)

Scroll through the displayed information.
• Horizontal joystick movement (to the left/to the right)

Change the settings.
• Shortly press in the joystick in the rest position

Validation OK.