4
Fig. D
1. Unplug Adaptor from the wall outlet first and then remove all ornaments and decorations.
2. Disassemble the tree from the top to the bottom. Start with the tree top and gently lift to
remove it from the section below and fold all branches towards the pole.
3. Continue by gently lifting each section(s) from the section
below and fold all branches toward the pole until the bottom section
is removed from the tree stand. Place the protective cap on the poles
to avoid damaging the internal parts.
(See Fig. D)
4. Carefully place all tree sections into the shipping box and tape it shut.
5. When not in use, please store your tree in a cool, dry place away from
sunlight. Exposing your tree to excessive heat or humidity may damage your tree.
STORAGE INSTRUCTIONS
For Pre-lit Trees, If The Tree Does Not Illuminate
1. Please check to make sure that all plugs are properly connected and power cord is plugged into the wall outlet. (If
the tree comes with a foot pedal, try stepping on the on/off button).
2. Turning the poles gently to make sure pole to pole are connected into place.
3. Please check for loose, broken or missing light bulbs and replace as needed.
Loose Hinge Pin
1. Extra hinge pins are included for repairing the hinges. Place the branch into the slot of the bracket.
2. Insert a new hinge pin through the hole and secure using the retainer washer.
(See Fig. E)
TROUBLE SHOOTING TIPS
Each tree includes hinge pins/washers,
If extra parts are needed, please contact our customer service centre at 1-800-521-2364
SPARE PARTS
Fig. E
WARNING
1. To reduce the risk of fire and electric shock:
a) Use only the power supply that was provided with this product;
b) Do not install on trees having needles, leaves or branch covering of metal or materials which look like metal;
c) Do not mount or support strings in a manner that can cut or damage wire insulation.
2. Use only the adaptor supplied with this product. Using a different adaptor will damage the lights
and may cause fire,or electrical shock hazards.
3. For Indoor Use Only.
4. The external flexible cable or cord of this tree cannot be replaced. If the cord is damaged, the luminaire should be destroyed.
5. Light bulbs cannot be replaced. Do not tamper the light string in anyway.
USE AND CARE INSTRUCTIONS
A. Before using or reusing, inspect product carefully. Discard any products that have cut, damaged or frayed wire insulation
or cords, cracks in the lampholders or enclosures, loose connections or exposed copper wire.
B. This product must be fully disassembled for storage to avoid undue strain or stress on conductors, connections and wires.
Do not leave any parts of the product (including tree sections and the tree stand) connected when not in use.
C. When storing the product, carefully remove the product from wherever it is placed, including tree branches
or bushes, to avoid any undue strain or stress on the product conductors, connections and wires.
MODEL #: TG70M3ANRL03
