GLP impression FR1 TM, Руководство пользователя

Страница: 15 / 36

German Light Products®
impression® FR1 TM User Manual 15
Preparing for use
Warning! Read ‘Safety’ starting on page 4 for important safety information
that you must understand before you install or operate the luminaire.
Included Items
See Figure 4. The impression FR1 TM is supplied with the following items:
•
Retaining collar A for installing in lighting track
•
Safety cable B with lockable clip and eyebolt for fastening to a retaining collar.
Figure 4. Included items
Installing the luminaire on lighting track
To install the luminaire:
Check that the lighting track is safely and correctly installed in accordance with
the track manufacturer’s instructions. Check that the track can safely support a
load of 5 kg per 500 mm / 11.1 lbs. per 20 in. Do not install more than one FR1 TM
luminaire per 1000 mm / 40 in.
Check that the head of the luminaire will be at least 0.5 m (20 in.) away from
combustible materials (paper, textiles, wood, etc.) when the luminaire is installed.
Shut down and lock out power to the lighting track.
Check that the fasteners at both ends of the luminaire’s track adapter are in the
open position and oriented so that they will fit correctly into the track.
Lift the luminaire up to the lighting track and pass the track adapter and fasteners
into the track. If the fasteners are not correctly oriented, remove the luminaire from
the track, turn it 180° end-to-end and pass the track adapter and fasteners into the
track again.
Warning! Support the weight of the luminaire until you have closed both
of the two mechanical fasteners at the ends of the track adapter. Do
not allow a luminaire to hang from one fastener only.
A B