GLP Fusion MBL40, Руководство пользователя

Страница: 24 / 37

www.glp.de Control menus and onboard display
24 Fusion MBL40 User Manual Rev. A
9.
Control menus and onboard display
Warning!
DMX control is disabled when the control menus are active. Be
prepared for the fixture to emit strong light as soon as you exit the control menus.
The control panel and onboard LCD display provide access to user settings, readouts and
utilities. See previous page for operation of the rotary switches.
Figure 5. Onboard control panel
The four control buttons have the following functions:
MENU : Activate the menus or go back one level towards the top of the menu.
UP : Scroll up or increase a number.
DOWN : Scroll down or reduce a number.
ENTER : Activate the control panel if it is in sleep mode. Then enter a menu, select a
setting or implement a command.
When you apply power to the fixture, it boots up. After it has booted, the panel displays the
default screen, see Figure 5. The default screen displays the fixture’s DMX mode and the
DMX address that the fixture is using.
By default the display will flash when no DMX data is being received. This can be useful
when rigging and checking DMX connections but you can switch the feature off using the
SETTINGS
Æ
SCRNFLASH option on the control panel.
You can set the display to go into a blank sleep mode after a time by using the SETTINGS
Æ
SCRNTIME control panel option.
DMX control is disabled when the control menus are active.
See also the Display On / Off functions on the
DMX Control / Settings channel.
Display Locking
You can configure the display to lock after a period of time to prevent accidental changes
to the options using the SETTINGS
Æ
SCRNLOCK menu setting. To unlock, hold down the
MENU and ENTER buttons together for 3 seconds.
When the display is locked, pressing any button will show the message “HOLD 3S
MENU/ENT” and the button press will have no other effect.