Glow-worm Envirosorb 10, Инструкция по эксплуатации, Страница: 15 / 24

www.glow-worm.co.uk
15
6 Operating instructions
6.2 PROGRAMMABLE MODE
On/
/Mode
Off/
/Set
AM
PM
1 2 3 4 5 6 7
°C
°F
LOW
BAT
ON
OFF
TIMER
ON OFF
For temperature control the control must be set as a room
thermostat.
The contol responds to the time and weekly programming as
set. To set up programming, follow the steps below:
1st step:
Press
On/
/Mode
Off/
/Set
AM
PM
1 2 3 4 5 6 7
°C
°F
LOW
BAT
ON
OFF
TIMER
ON OFF
until the day of the week that you want to
program blinks.
2nd step:
Select the days for which the same programming is going to
be carried out.
Example: 1st block: Working days M-T-W-T-F correspond to
the numbers 1-2-3-4-5
Use the▲and▼arrows to select block days 1, 2, 3, 4, 5.
On/
/Mode
Off/
/Set
AM
PM
1 2 3 4 5 6 7
°C
°F
LOW
BAT
ON
OFF
TIMER
ON OFF
3rd step:
Press
On/
/Mode
Off/
/Set
AM
PM
1 2 3 4 5 6 7
°C
°F
LOW
BAT
ON
OFF
TIMER
ON OFF
The start-up time flashes. The start-up time
must ALWAYS be earlier than the stop time.
Using the▲and▼arrows select the start-up time (for example
7:00 AM)
4th step:
Press
On/
/Mode
Off/
/Set
AM
PM
1 2 3 4 5 6 7
°C
°F
LOW
BAT
ON
OFF
TIMER
ON OFF
The stop time blinks.
Using the▲and▼arrows select the stop time (for example
13:00 PM)
Press
On/
/Mode
Off/
/Set
AM
PM
1 2 3 4 5 6 7
°C
°F
LOW
BAT
ON
OFF
TIMER
ON OFF
to confirm.
5th step:
Now select the desired temperature (for example 23.0°C)
using the▲and▼arrows. The operating mode will be set
later
Press
On/
/Mode
Off/
/Set
AM
PM
1 2 3 4 5 6 7
°C
°F
LOW
BAT
ON
OFF
TIMER
ON OFF
to confirm.
6th step
Generation of another programming section within the day
block.
Steps 1 to 5 are repeated.
The next programming period must come after the first one.
For example: Start-up: 16:00 PM
Stop: 20:00 PM
Temperature: 25°C
NOTE: A different temperature can be selected in each time
section.