background image

6

221680G

Instructions for Use

Draining and Filling

CAUTION.  This boiler works in a pressurised system which
must only be drained, refilled and pressurised by a competent
person.

Note:  If the pressure gauge indicates a loss of system pressure,
that is, less than 0.7bar, YOU MUST CONTACT YOUR
INSTALLER.

Pressure Relief Safety Valve

CAUTION.  A pressure relief safety valve and discharge pipe is
fitted to the boiler.  This valve must not be touched.  Should there
be any discharge from the pipe, turn the boiler off, isolate from
the electrical supply and contact your installation/servicing
company.  The outlet should be kept clear

Cleaning

WARNING.  This appliance contains metal parts (components)
and care should be taken when handling and cleaning with
particular regard to edges.

The boiler casing can be cleaned using a mild liquid detergent
with a damp cloth, then a dry cloth to polish.

Do not use any form of abrasive or solvent cleaner as you may
damage the paint work

Boiler Casing

CAUTION.  Do not remove or adjust the casing in any way, as
incorrect fitting may result in incorrect operation or failure to
operate at all.  If in doubt seek advice from the local gas
company or your installation/servicing company.

Replacement Parts

If replacement parts are required apply to your local supplier or
British Gas.

Please quote the name of the appliance.

7565

7004

MAINS
ELECTRIC

SWITCH 

‘K’

CONTROL

KNOB 

‘C’

SUMMER/ WINTER

BUTTON 

‘J’

PRESSURE
GAUGE 

‘A’

Diagram 4

‘H’

‘G’

‘E’

‘F’

PIEZO 

‘D’

CONTROLS COVER

CONTROLS
FASCIA

CLOCK TIMER

IF FITTED 

‘B’

KEY TO NEON LIGHTS

‘G’

  

  LOW WATER PRESSURE

‘H’

   

  SUMMER SETTING 

(HOT WATER OPERATION ONLY)

‘F’

   

  

  WINTER SETTING 

(HOT WATER AND CENTRAL HEATING OPERATION)

‘E’

   

    POWER ‘ON’

Содержание COMPACT 100p













































Отзывы: