Glow Stream GS300-12x-NDI, Руководство пользователя

Страница: 12 / 80

10
1. Infrared Remote
An infrared remote control device is included with the camera. (See page 17 for detailed instructions on
how to use the remote.)
2. Web Browser
Connect to the camera using a web browser on any device on the same local area network as the camera.
To configure the camera open your web browser and enter
192.168.5.163 (factory default) in the URL
address bar and press Enter.
Enter the factory default user name
admin and password admin and press Enter. You can use the web
interface to control pan, tilt and zoom of the camera, start and stop video recording, and configure the
camera.
(See page 31 for detailed instructions on how to set up the camera on your network, control the camera
and change its settings.)
Note: If the network settings of the camera have previously been configured, the IP
address is probably different. See page 37 for instructions on finding the current IP
address of the camera.