13
GB
Observe the information given by the manufac-
turer of the medium.
G
In practice, sprayed liquids are a mixture of
various substances whose composition is
only known to the manufacturer. The suit-
ability of the unit for a specific liquid must
therefore be determined before use by the
user in conjunction with the manufacturer
of the substance.
Foreseeable misuse
G
The device is
not
suitable for:
- formic and hydrofluoric acid in any
concentration.
- acids and alkalis at concentrations
greater than the amounts quoted or
as mixtures.
- oils and fuels.
-Media which may cause or promote cracks
and fissures in the plastics used.
- liquids at temperatures over + 40°C.
- inflammable liquids.
- very tenacious or sticky liquids, or liquids
that leave residues, which cannot be
completely poured or flushed out of the
unit (oils and oil-bearing liquids).
G
On request, the manufacturer of the unit
can make available a detailed list of the
materials used in the parts of the unit for
more detailed examination.
G
Unauthorised changes to the unit made by
the user or inappropriate use shall render
null and void the liability of the manufac-
turer for any damage caused as a result.
Getting Started
G
Remove the pump
(B)
by turning it to the
left. Before doing this release pump rods,
turn them 180° and transmit the srew force
via the back of the zwistlocks on the pump
housing.
G
Fill the tank, see ”Max. filling volume” in
the Technical data section for details on the
maximum amount that can be put in.
G
Insert pump assembly
(B)
and screw tight.
G
Pump up the unit. Observe the safety /
pressure relief valve
(A)
during pumping.
Peak pressure is reached when the safety /
pressure relief valve is triggered. Any ex
WARNING!
Health risk through leaking cleaning
fluid!!
A leaking device or leaking components may
result in draining or spouting of cleaning fluid.
For this reason, observe the following safety
instructions:
- Check that the unit is in perfect condition
and properly sealed each time before use.
Pull up the safety / pressure relief valve
(A)
by hand and check that it returns to the
starting position.
- Only operate or move device when standing
upright.
- Inspect all screw joints for tight fitting.
WARNING!
Contact with cleaning fluids poses a
health risk.
Observe the max. filling amount (see
Technical Data) and the correct dosing given
by the spray producer.
All manuals and user guides at all-guides.com
