Globus HT-922, Инструкция по эксплуатации

Страница: 23 / 40

23
have to be carried out only with medical personnel
approval.
The sonophoresis is a method that uses ultrasounds to
increase the skin permeability, in order to favour the
absorption of active ingredients and sera.
To carry out this treatment you have to place a sufficient
dose of cream on the interested part, mix it with the gel and
start the treatment.
To choose the medicine to use, consult your doctor.
The combination of the two methods (ultrasound and
medicine) amplify the result of the individual methods.
Precautions
If the intensity is too high and you carry out the process in a
not meticulous way, this effect can causes irritation and
burns on skin. The skin must not be injured ( do not shave
your skin before the treatment to avoid micro cuts caused
by the razor).
Persons with metallic implants are forbidden to use
SONOPHORESES programs. The patient must not be in
contact with metallic elements (Es. Table or chairs).
Use
-
Insert the power adapter supplied with the unit.
- Connect the supplied cable to the polar socket (see
picture pag.4) and insert
the electrodes in the specific plug. Apply the electrodes
on the skin.
- Put some gel on the ultrasonic probe.
- Push the button “Up” to turn on the unit.
Keep pushing the “Set” button for 2 sec. to set up the
ionophoresis function.
- The timer setting of 10 minutes and the “P1” program will
display every 3 sec.