ECO Spot LED10 User Manual
Copyright © 201
9
Globus New Media LLC
Page 2
Handling Instructions
Warranty
One Year from Date of Purchase. For warranty, contact your dealer or
Globus New Media LLC at 1-800-213-1092 or 1-
831
-
431
-
880
0
Focusing
•
Power up the projector by pressing the larger switch in the back.
•
Turn on the gobo rotator with the smaller switch in the back and switch it off when
the gobo projects in the desired position.
•
Focus the projection by twisting the lens in and out until the image is well focused.
When used for the first time, the lens will often need to be twisted outwards many
rotations to reach the focusing point.
Gobo Rotator
Multi-functional Yoke
•
Before the initial start-up, please unpack and carefully check for damage
caused during transportation.
•
Place your fixture at a suitable place with good air flow.
•
Make sure there are no flammable materials close to the lamp.
•
When suspending the fixture above ground level, verify that the structure can
hold at least 10 times the weight of all installed devices.
•
Verify that all external covers and rigging hardware are securely fastened and
use an approved means of secondary attachment such as a safety cable.
•
The gobo rotator can be turned on/off with the small switch on the back plate.
•
There are no controls for rotating speed or direction.
•
The yoke can slide over the whole length of the fixture body to accommodate
multiple pointing directions.
•
The yoke acts as a stand foot.
•
The yoke can be screwed to a wall or ceiling or fastened with a C-clamp
