ECO Spot 70 User Manual
Copyright © 2010 Globus New Media LLC
Page 3
Gobo Changer (model ES-70-C)
The gobo changer has four gobo slots. A timer continuously switches between the
different gobos. It will always go the full sequence ( slot 1,2,3,4,1,2,…), therefore all slots
need to be populated with gobos. Turn on and off the gobo changer with the small
switch on the back plate.
The interval timer can be set to changing intervals between 3-5-15-30-60-120 seconds.
The interval time is selected by pushing the red button on the projectors back plate. Every
push advances the interval to the next longer interval time (i.e. from 5 to 15 seconds).
Push the button while the changer stands still. Once the longest time has been reached, it
will start over at the shortest time. For showing only a single gobo w/o any changes,
simply turn off the changer power switch on the back plate when the correct gobo shows.
The unit has an additional static slot, which can be used as
Gobo Rotator (model ES-70)
Gobo Replacement
Unplug the power cord and let the projector cool down for 20min. Use caution, the
housing and light bulb may still be hot.
Unscrew the four thumbscrews to remove the front cover with the projection lens.
Rotator or static gobo slot
: Push the two pins of the gobo retaining ring together and
pull out the retaining ring.
Gobo Changer:
Unscrew the retaining cylinders to
access the gobo.
Carefully remove the old gobo and replace it with the
new gobo.
If you have a glass gobo, place the most reflective side
towards the light bulb.
Replace the retaining ring and make sure it evenly
pushes the gobo all the way back.
Replace the front cover and adjust the focus.
optional color overlay in conjunction with b/w gobos in the changers gobo wheel.
gobo color changer in conjunction with color filters in the changers gobo wheel.
Turn on and off the gobo rotator with the small switch on the back plate
There are no controls for rotating speed or direction.
