ECO Spot 35FC User Manual
Page
2
Copyright © 2010 Globus New Media LLC
Page 2
Warranty
One Year from Date of Purchase
Contact
Globus New Media LLC
Tel 1-888-987-1112 or 1-408-416-4444
Fax 1-408-416-4445
www.globusnewmedia.com
Focusing
Power up the projector by pressing the larger switch in
the back.
Turn on the gobo rotator with the smaller switch in the
back and switch it off when the gobo projects in the
desired position.
Focus the projection by twisting the lens in and out
until the image is well focused. When used for the first
time, the lens will often need to be twisted outwards
many rotations to reach the focusing point.
Gobo Rotator (model ES-35)
Gobo Changer (model ES-LED35-C)
The gobo changer has four gobo slots. A timer continuously switches between the
different gobos. It will always go the full sequence ( slot 1,2,3,4,1,2,…), therefore all slots
need to be populated with gobos. Turn on and off the gobo changer with the small
switch on the back plate.
The interval timer can be set to changing intervals between 3-5-15-30-60-120 seconds.
The interval time is selected by pushing the red button on the projectors back plate. Every
push advances the interval to the next longer interval time (i.e. from 5 to 15 seconds).
Push the button while the changer stands still. Once the longest time has been reached, it
will start over at the shortest time. For showing only a single gobo w/o any changes,
simply turn off the changer power switch on the back plate when the correct gobo shows.
The unit has an additional static slot, which can be used as
Turn on and off the gobo rotator with the small switch on the back plate.
There are no controls for rotating speed or direction.
optional color overlay in conjunction with b/w gobos in the changers gobo wheel.
gobo color changer in conjunction with color filters in the changers gobo wheel.
ECO Spot 35FC User Manual
Copyright © 2010 Globus New Media LLC
Page 3
Gobo Replacement
Unplug the lamp before re-lamping the projector. Let the
projector cool down for min. 20min. Use caution, the
housing and light bulb may still be hot.
Unscrew the four thumbscrews to remove the
front cover with the projection lens.
The gobo rotator with the gobo holder is now
exposed.
Push the two pins of the gobo retaining ring
together and pull out the retaining ring.
Carefully remove the old gobo and replace it with
the new gobo.
If you have a glass gobo, place the most reflective
side towards the light bulb.
Replace the retaining ring and make sure it evenly
pushes the gobo all the way back.
Replace the front cover and adjust the focus.
Lamp Replacement
Unplug the lamp before re-lamping the projector. Let the projector cool down for min.
20min. Use caution, the housing and light bulb may still be hot.
Unscrew the four thumbscrews to remove the front cover with the projection lens.
The gobo rotator with the gobo holder is now exposed.
Carefully pull out the gobo holder.
The lamp is now exposed. Remove it by twisting it counter clockwise and then pull it out
of the socket. Reverse this procedure for the new lamp. Do not touch the glass of the
lamp with your fingers.
Replace the gobo rotator and the front cover.
Changing the Projection Lens
Depending on the desired projection distance and size, different projection lenses can be
used. How to change the lens:
Loosen the ring that seals the projection lens on the base of the front plate and remove
it.
Unscrew the projection lens
Screw in the new lens and focus it.
Re-tighten the ring that seals the projection lens on the base of the front plate. Hold the
projection lens steady with your other hand so focus won’t change.
