ECO Spot 35FC User Manual
Page
4
Copyright © 2010 Globus New Media LLC
Page 4
Specifications
Voltage (US Version)
90-130V, 50-60Hz, 0.38A, 41W
Power factor 0.98
International Version
200-240V, 50Hz, 0.2A, 41W
Ambient Operating Temperature
-13 to 104°F (-25 to 40°C)
Dimensions / Weight
Fixture Body
: 10in x 5.25in (254mm x
133mm)
Yoke Base:
5.5in x 5.5in (140mm x
140mm)
Yoke Height
: 6in (127mm)
Weight:
7lbs (3.1kg)
Gobo Dimensions
Metal or Glass Gobos and Dichroic filters
Outer Diameter (OD): 37.5mm (1.47 in)
Max. Image Diameter (ID): 25mm (1.0 in)
Max Thickness 4mm (0.16 in)
Replacement Lamp
35W HID MR16 Lamp with GU10
socket
Philips MASTERColour CDM-Rm Mini
Elite35W/930 GX10 10D
Other product name: MC CDM-Rm Mini
Elite 35W/930 GX10 10D
ILCOS code: MRS/UB-35/30/1A-H-GX10
Order Code: HID35Eco
Rated bulb life 12,000hrs
Expected bulb life 8,000hrs
Color temperature 3,000K
Luminous Intensity 18,000cd
Socket GX10
CRI 87-90
Lens Options
Standard 20 degree (included)
Narrow 10 degree
Wide 25 degree
ECO Spot 35FC User Manual
Copyright © 2010 Globus New Media LLC
Page 1
Thank you for choosing an ECO Spot 35FC™ Gobo projector. This
unit is equipped with a fan cooled 35W discharge light bulb, which
delivers light output and long bulb life.
Please read this manual before installing or operating this fixture,
follow the safety precautions listed below and observe all warnings.
Package Contents
Projector with power cord and integrated gobo holder and rotator
Light Bulb
Test Gobo
Safety Information
Handling Instructions
ECO Spot 35FC™ User Manual
Do not look directly into the lamp, it can result in eye damage.
This product is not for household use, it presents risks of severe injury or death due
to fire and burn hazards, electric shock, lamp explosion and falls.
Light fixtures should be installed and maintained only by qualified personnel with
experience in lighting equipment and general electrical experience.
Always disconnect the unit from power and allow cooling down for 20 minutes
before servicing.
Place your fixture at a suitable place with good air flow and keep flammable materials
away.
Minimum distance to flammable materials = 1ft. (0.3m).
Minimum distance to illuminated surfaces = 3.3ft. (1.0m).
Provide a minimum clearance of 4in. (10cm) around air vents.
Don’t touch the hot surface during operation, use gloves if necessary.
Replace Lamps only with the same type other lamps may cause damage.
Always ground (earth) the fixture electrically.
Use only a power source that complies with local building and electrical codes and
has both, overload and ground-fault protection.
Do not use the fixture if the power cable or power plug is in any way damaged,
defective or wet, or if they show signs of overheating.
When suspending the fixture above ground level, verify that the structure can hold at
least 10 times the weight of all installed devices.
Verify that all external covers and rigging hardware are securely fastened and use
approved means of secondary attachment such as a safety cable.
Please unpack and carefully check for damage caused during transportation.
Make sure there are no flammable materials close to the fixture.
Do not touch the light bulb with bare hands, the oils can damage the bulb and can
cause failure or explosion of the bulb.
After turning off the projector, it may take up to 15 minutes to restart.
Use only genuine spare parts for part replacement.
