LAN Terminal User Manual GTIN (EAN) 4260179020360 | © GloboFleet® GmbH | Page 6
GloboFleet
®
LAN-Terminal
The terminal is fixed on the wall with a mounting bracket. The mounting brackets
are in a sealed pack. In the pack there are 2 each knurl screws which will be
used later for installing the terminal on to the mounting bracket.
Use the provided drilling template to line up the holes to be drilled on the wall.
After drilling the holes install the bracket using the 4 predrilled holes on the wall.
Using the two knurl screws provided screw them in the treads on the lower part
of the mounting bracket (see arrow). Pay attetion during installation that the
knurl screws are pointing down.
The terminal can now be ins-
talled by first sliding it on to the
rails starting from the top. Then
while pushing the terminal lightly
against the wall push downward
till it engages onto the mounting
bracket. Finally tighten the two
knurl screws on the lower side to
prevent an accidental fall of the
terminal.
Now connect the terminal to a lo-
cal network using a network cable
and connect the power adapter to
the lower side of the terminal.
After plugging in the power adap-
ter the terminal is ready for opera-
tion and can now be configured over the network.
mounting
instructions
