Globe GLS30, Инструкция по эксплуатации, Страница: 8 / 12

Page 8
To disconnect AC power supply, remove electrical plug from electrical outlet.
NOTE: Turning scale off at end of day will lengthen the life of scale display.
Weighing Single Items
1. Make sure nothing is on or touching weigh platter.
2. Use OFF ON switch to turn scale on. A beep will sound, display will cycle through 000000-999999, then the
display will show scale specifics, another beep will sound and then display will show 0.00. The ZERO
indicator arrow and lb indicator arrow will display.
3. To enter tare weight:
a. Put tare weight item or container on weigh platter and press TARE key to save setting. The TARE
indicator arrow will display.
NOTE: To display the tare weight, remove the weight item or container from the platter. The tare
weight will then display as a negative number.
b. Put item onto weigh platter. The ZERO indicator arrow will no longer be displayed.
NOTE: The item on the platter, must include the weight item or container used to set the tare. The item
weight cannot be calculated if the tare weight item has been removed.
4. Use the numeric keys to key in unit price, dollar value first, then press the decimal point key and then cents.
Display will show weight, unit price and total price.
5. Remove item from platter.
NOTE: The unit price and tare weight are stored until new values are keyed in.
a. Press CL key to clear unit price.
b. Press TARE key to clear tare weight. The TARE indicator arrow will no longer be displayed.
Weighing Multiple Items With A Cumulative Total
1. Follow steps 1 through 5 above for weighing single items. Before removing item, press M+ key to add
total price into memory. The M+ indicator arrow will display.
Example:
A customer buys 2.2 lb of product, with a unit price $8 and 1.1 lb of product, with a unit price $5.
1. Put the 1st item (2.2 lb) on the weigh platter then enter unit price ($8).
2. Press M+, the total price is added to the accumulated memory.
Display will show: Weight as Add=01, Unit Price as blank and Total Price as current total.
3. Remove 1st item, put the 2nd item (1.1 lb) on the weigh platter. The display will not change. Enter the
2nd items unit price ($5).
4. Press M+, the total price is added to the accumulated memory.
Display will show: Weight as Add=02, Unit Price as blank and Total Price as the new total.
5. Press CL to clear unit price and return to weighing state.
Operating Instructions