Step 1
Connect the controller and the outdoor cable to the power adapter.
Step 2
If the Lights are going to be used in the garden, connect the ground spike to the LED head using the included Allen Key.
Screw the LED head to the top part of the ground spike.
*The LED head can be mounted onto a preferred location, such as a deck, without the use of the ground spike. To do so, remove the swivel base
from the LED head using the Included Allen key, attach the base in the desired location and reattach the LED head.
Step 3
Connect each of the LED lights to one of the ends of the outdoor cable. Please make sure to properly align both ends of the cables for a proper
connection and then tighten the seal.
Step 4
Connect the power adapter to an outlet. Follow the “Connecting Instructions” (next page).
Step 5
Place the outdoor lights in your preferred location and enjoy!
MOUNTING INSTRUCTIONS
