9
9
This document is the exclusive property of GlobalTop Tech Inc. and should not be distributed, reproduced, into any other format without
prior permission of GlobalTop Tech Inc. Specifications subject to change without prior notice.
Copyright © 2014 GlobalTop Technology Inc. All Rights Reserved.
EV-Kit User Manual (BLE Module)
GlobalTop Technology
Ver. A01
Document #
3.1.2 BLE Module loaded with Security profile
Connect the USB cable between PC and EV-Kit. The USB cable is used to power the
EV-Kit. Configure the EVK as described in the following steps.
Step 1:
Connect Jumper (JP5) to Ground (marked GND).
Step 2:
Connect Jumper (JP3, JP4) to Button (marked Button).
Step3:
Add Jumper (JP2) for Buzzer function.
Step 4:
Insert CR2032 coin battery
Step 5:
Dip Switch (S2), push all four buttons down to OFF position.
All of applications for security profile by customization that like LED or buzzer with
button function.
