GlobalSCAPE DMZ Gateway v3.1, Руководство пользователя

Страница: 33 / 60

Administering DMZ Gateway
33
For example, if you want to allow only 192.168.174.159 and block every other IP
address, click
Denied access , click Add , then type
192.168.174.159
in the IP
Mask box. This will deny access to all IP addresses except 192.168.174.159.
9. Click Add . The New IP Access Exception Entry dialog box appears.
10. Specify the IP address or range of IP addresses to which you are denying or granting access.
You can use wildcards to select ranges of IP addresses.
11. Click OK to close the dialog box.
12. Click Finish . The IP Mask appears in the exception list.
When you make changes to DMZ Gateway Server, you must stop and restart any Site connected to DMZ
Gateway.
Renaming a Profile
The Profile name appears in statistics, logs, messages, and reports. You can change the name in the
DMZ Gateway interface.
To change the name of a Profile
1. Click the Profile in the tree, then do one of the following:

Click the Profile name again.

Right-click the Profile name, then click Rename Profile .

On the toolbar, click Rename Profile .

On the main menu, click Profile > Rename .
The name in the tree becomes editable.
2. Type a new name for the tree, then press ENTER.
Deleting a Profile
You can configure multiple Profiles. You can delete Profiles that you no longer use, but you cannot delete
a Profile if it is the only Profile.
To delete a Profile

Click the Profile in the tree, then do one of the following:
o
Right-click the Profile name, then click Delete Profile .
o
On the toolbar, click Delete Profile .
o
On the main menu, click Profile > Delete Profile .
The Profile is deleted from the tree.