D3plug User Guide
–page
7
/
14
1.
WiFiclientmode test
D3Plug has a built-in WiFi module which is in compliance with 802.11 b/g/n standard. The WiFican work as
client or AP modebut only one at a time. The default mode is WiFi client modeevery time when it powers on, and the
indication LED 3 (see page 4) is off and LED2 issolid blue.
Here are steps for testing:
(1) Enter command and you will see message for mlan0 device.
#ifconfig
(2) Scan for WiFi AP near-by
# iwlist mlan0 scan
