7
4.2 Switch On/Off
1.
To turn the device “ON”, please take a proper magnet under device’s LED for 4
seconds as picture above. Then it would blink Red 3 times (100ms on, 100ms off).
There are two kinds of behavior as following table when the device is on.
Operation mode
Low battery mode
Take magnet under device
’s LED for 1
second and it will blink Red 1 time
(100ms).
Take magnet under device
’s LED for 1
second and it will blink Red 1 time
(1 second). It will not send any report.
2.
To turn the device “OFF”, please take a proper magnet under device’s LED for 4
seconds. Then it would blink Red 3 times (100ms on, 100ms off).
Noted: Take magnet under device LED for 1 second and it has no LED blink.
3. To do hardware reset, Take magnet under device
’s LED for 11 seconds and it would
blink Red for 3 seconds (50ms on, 50ms off).
