17
Attaching GV-370 to the Mount/Cradle
Release
Lock
1.
Place the GV-370 at a downward angle into the base of the cradle.
2.
Push the top of GV-370 inward until the top clip locks into place.
3.
Clean windshield glass thoroughly with glass cleaner.
4.
Moisten suction cup and attach mount to the windshield.
5.
Lock mount lever by moving forward.
●
To release, bring lever back and pull on the suction cup’s clear tab to release suction.
Never pull on mounting arm to remove from glass,
●
It is suggested that you attach the mount in the appropriate place in your car. Do not
mount in front of an airbag panel, or block the driver's vision.
WINDSHIELD MOUNTING DISCLAIMER
State law prohibits drivers in California and Minnesota from using suction mounts on their
windshields while operating motor vehicles.
Other dashboard or friction type mounting options
should be used.
Globalsat does not take responsibility for any fines, penalties, or damages that
may be incurred as a result if disregarding this notice. (see: California Vehicle Code Section
26708(a); Minnesota Statutes 2005, Section 169.71.
It is the responsibility of the user to verify their
own state and local ordinances to avoid violation.
