BTH-820, BTA-830 user manual
page
6
BTH-820 button function
Button
Incoming call is
ringing
While on the phone
While playing the music
with Bluetooth Dongle
(AVRCP, A2DP profile).
While playing the
music with BTA-830
(A2DP profile)
Answer
Transfer to cell phone
Play / Pause
Play / Mute
Refuse the call
Hang up
Stop
Mute
Answer
Volume up
Volume up
Volume up
Answer
Volume down
Volume down
Volume down
Answer N/A
Next
N/A
Answer N/A
Previous
N/A
Lock the buttons
Lock the buttons
Lock the buttons
Lock the buttons
Remark 1
--
To avoid the noise
interference, please
put the microphone
within 30 cm from your
mouth while talking.
Remote control
(AVRCP) is supported
under “Microsoft
Window Media Player”.
--
Remark 2
When disconnected, you can connect to the previous paired cell phone by pressing the play key
on BTH-820. You can disconnect them by pressing and holding the stop key for 2 seconds.
If BTH-820 is connected only with a cell phone, you can perform the redial function by pressing
and holding
or
for 2 seconds. You can initiate voice dialing by pressing and holding
the play key for 2 seconds.
LED indicator function
Status
BTH-820
BTA-830
Standby
Blue LED flash once
Green(or Blue) LED flash once
Connecting
Blue LED flash twice
Green(or Blue) LED flash twice
Transferring
Blue LED flash four times
Green(or Blue) LED flash four times
Pairing
Blue and red LED flash quickly by turns
Green(or Blue) and red LED flash quickly by turns
Low battery
Red LED is on
Red LED is on
