2.2 How to test your Compact Flash GPS (through CF to PCMCIA adapter) for
Notebook PC ?
Users can use the Hyper Terminal program of Windows to verify that the GPS is actually configured properly
and working.
The Hyper Terminal program of Window 98 can not select COM port above COM5. Users test with map
software directly.
1. Run the “Hypertrm.exe” from “Program
→
Accessories
→
Communications
→
Hyper Terminal”.
2. Select the proper COM port for your GPS device.
3. Set COM port to :
Baud rate:
4800
Data bit:
8
Parity: None
Stop bit:
1
Flow control:
None
4. If no mistakes have been made in the configuration process there should be data being displayed in the
window, which is confirmation that the communication between the GPS device and the “Hyper Terminal”
software is working properly.
3. Specification
Interface:
Compact
Flash
type
Ⅰ
Protocol:
NMEA0183
GGA,
GSA,
GSV,
RMC,
VTG,
GLL
Baud
Rate:
4800,N,8,1
Max.
Update
Rate:
1
Hz
Datum:
WGS84
Channel:
12
channel
all-in-view
tracking
Frequency:
L1,
1575.42MHz
Hot
Start:
8
sec.
Average
Warm
Start:
38
sec.
Average
Cold
Start:
48
sec.
Average
Reacquisition
Time: 100
ms
Position Accuracy:
15m 2D RMS, SA off
Maximum
Altitude:
18,000m
Maximum
Velocity:
515m/s
Voltage:
DC
3.3V+-
10%
Power consumption:
90mA continuous mode
Antenna
Type:
Built
in
active
antenna
Содержание BC-307
Страница 1: ...User Manual GPS Receiver with Compact Flash Interface BC 307...
Страница 2: ...BC 307 at a Glance...
