Part1: OUTPUT
The HDMI OUTPUT connect to HDMI equipped TVs or
monitors and the HDBT OUTPUT connect to the HDBT
Receiver. The coaxial and
stereo
output is connected an audio
amplifier. The LAN is connected to PC or Router.
Part2: INPUT
1) HDMI 1/ 2/ 3/ 4:
Connect to HDMI sources such as DVD
player /Blu-ray player for both video and audio signal
conversion.
2) DVI:
Connect to DVI sources such as PC.
3) VGA 1/ 2:
Connect to a PC/Laptop source for video signal
input with a D-Sub 15pin cable or connect to a DVD player
source for video signal input with a D-Sub 15pin to 3 RCA
adaptor cable.
4) CV+L/R:
Connect to a composite video source such as a
video /DVD player for both video and audio signal
conversion.
5) 3P captive screw connectors(3.81mm):
Connect to
source’s L/R output with 3P cable for audio signal
conversion.
Part 3: IR OUT
Connect with the supplied
wideband IR TX.
Part 4: CONTROL
1) TCP/IP:
This port is the link for TCP/IP controls, connect to
an active Ethernet link with an RJ45 terminated cable.
Ver1.1 Page 6 of 21
