Globaljig Evolution, Руководство пользователя

Страница: 17 / 48

15
4 INSTALLATION
4.1 Transport and handling
The packaging used for shipping and handling the LB is made up of:
-
1 wooden pallet containing the LB.
Gross weight: approx. 1580 kg
-
1 crate containing the electric-hydraulic control unit.
Gross weight: approx. 45 kg
-
1 crate containing the pulling arm and standard accessories.
Gross weight: approx. 286 kg
A forklift rated for at least 2000 kg is required to move the complete package.
The forks must be a minimum of 1.5 m long.
The same holds for moving the LB on the ground after it has been unpacked since
there are no special accessories arranged for moving it. The hydraulic control
unit is lifted using a forklift.
! ! WARNING ! !
When lifting and handling the LB,
be particularly careful to prevent bumping, shaking and
jerking as this could throw the lift out of balance.
4.2 Storage
The LB has been designed to be stored in environments having the following
characteristics:
-
temperature ranging between
-25°C e + 55°C
for long periods and
between
-25°C and 70°C
for periods of less than 24 hours;
-
relative humidity ranging between 30% and 95% (without any
condensation).
The unit cannot be stored in places with characteristics different from those
indicated above.
4.3 Installing the lift bench
 Establish the LB working position considering that the hose connecting the
electro-hydraulic control unit to the LB is approximately 3.5 meters long and
connects on the front opposite the vehicle ramp.
 Define the LB working area marking off a space of not less than 6.92 x 3.48
mt.
Make connections:
 Oil supply hose (unscrew the male / female caps)
 Air hose
 Limit switch cable
 Hook up the power supply (230/400 V – 50/60 Hz three-phase; or 200 V –
50/60 Hz three-phase) to the control unit using the special plug.