TALK-100 User’s Manual 10
GL
OBALINX
®
TALK
-100
Placing a Phone Call
1.
Phone or Extension Numbers:
Dial the number directly (it takes about 2 seconds to connect)
Call Hold
Place a call on hold by pressing the “FLASH” button on the analog phone (if the
phone has that button). Press the “FLASH” button again to release the previously
held Caller and resume conversation. If no “FLASH” button is available, use “hook
FLASH” (toggle on-off hook quickly). You may drop a call using hook flash.
Call Waiting
Call waiting tone (3 short beeps) indicates an incoming call, if the call waiting
feature is enabled. Toggle between incoming call and current call by pressing
the “FLASH” button. First call is placed on hold. Press the “FLASH” button to
toggle between two active calls.
3-Way Conferencing
The TALK-100 supports Bellcore style 3-way Conference.
Instructions for 3-way Conferencing:
Assume that call party A and B are in conversation. Caller A (TALK-100) wants to
bring third Caller C into conference:
1.
A presses FLASH (on the analog phone, or hook flash for old model
phones) to get a dial tone.
2.
A dials C’s number.
3.
If C answers the call, then A presses FLASH to bring B, C in the conference.
4.
If C does not answer the call, A can press FLASH back to talk to B.
5.
If A presses FLASH during conference, C will be dropped out.
6.
If A hangs up, the conference will be terminated.
6
Basic Operation
