Globalcom Engineering
This document contains the proprietary information of Globalcom Engineering. Its receipt or possession does not convey any rights to
reproduce or disclose its contents or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific
written authorization of Globalcom Engineering is strictly forbidden.
Mod.N:Q060R03
3
1 DECLARATION OF CONFORMITY
Globalcom Engineering declares that the payment system BV1000CL, whose characteristics are
described in this manual, is conform to all relevant essential requirements on radio equipment and
telecommunications terminal equipment
RED
Directive
2014/53/EU
,
EMC
Directive
2014/30/EU
and
ROHS
directive
2011/65/EU
.
The following standards and essential test suites published in the “Official Journal” of the
European communities, have been used to demonstrate the conformity of the product:
ETSI EN 300-330-1
- Electromagnetic compatibility and Radio spectrum Matters (ERM); Short
Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive
loop systems in the frequency range 9 kHz to 30 MHz - Part 1: Technical characteristics and test
methods.
ETSI EN 300-330-2
- Electromagnetic compatibility and Radio spectrum Matters (ERM); Short
Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive
loop systems in the frequency range 9 kHz to 30 MHz - Part 2: Harmonized EN covering the
essential requirements of article 3.2 of the R&TTE Directive.
ETSI EN 301-489-1
- Electromagnetic compatibility and Radio spectrum Matters (ERM);
Electromagnetic Compatibility (EMC) standard for radio equipment and services - Part 1:
Common technical requirements.
ETSI EN 301-489-3
- Electromagnetic compatibility and Radio spectrum Matters (ERM);
Electromagnetic Compatibility (EMC) standard for radio equipment and services - Part 3: Specific
conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 40 GHz.
EN60950-1 + A11 + A1 + A12+A2
– Information technology equipment – Safety – Part 1: General
requirements
Compliance with these requirements shall be evidenced by the affixing of the CE on the product.
The company responsible for placing the product on the market:
Globalcom Engineering S.p.A.
Via Volta 39 21010 Cardano Al Campo (VA) Italy
DRAFT V01