MAINTENANCE
JUNO-NET
Programming mode is accessed via the front panel 7 key keypad or the miniature infra-red keypad (IR
Keypad) or by connecting a PC (PS2) keyboard to the Main Panel. It is also possible to upload and
download settings to a PC but to do this you must first enter the panel programming mode.
If using the front panel's keypad, the
keys will have the same function as the equivalent keys on
the IT Remote Control Keypad (or PS/2 keyboard). The OK key is equivalent to ENTER and the ESC key
will perform the same functions as the ESC key on the remote IR keypad
INFRA-RED KEYPAD
0
A
4
E
8
I
1
B
5
F
9
J
2
C
6
G
K
3
D
7
H
L
M
N
/
[
]
.
,
'
"
+
-
:
*
&
O
P
Q
R
S
T
U
V
W
X
Y
HOME
SHIFT
ENTER
B-SP
Z
SPACE
ESC
EXIT
HOME
: Return to first loop, zone, device etc.
ENTER
: Accept current selection
B-SP
: Backspace
ESC
.: Reject. (ESCape from current selection)
EXIT
: Press both keys simultaneously to stop programming
SHIFT
: Toggle this keypad to switch from alpha-numeric
to numeric
2.9 GETTING INTO PROGRAMMING MODE
23
JUNO-NET EN-54
MAINTENANCE MANUAL
21-08-2005
REVISION 1.0
OPERATION &
ss
ss
FRONT PANEL KEYPAD
ESC
OK
Used to confirm entry of any data or selection. Same
function as the ENTER key on IR remote control.
Used to increase selection or number. Equivalent function
as UP arrow key on IR remote control.
Used to decrease selection or number. Equivalent
function as UP arrow key on IR remote control.
Escape key. Used to exit a particular function. Equivalent
function as ESC arrow key on IR remote control.
Used to increase loop number. Equivalent function as +
arrow key on IR remote control.
Used to decrease loop number. Equivalent function as -
arrow key on IR remote control.
Note:
It is not possible to introduce text for labels using
the front panel keypad.
OK
ESC
+
-
