© 2004-2005 Global IP Telecommunications. All Rights Reserved. p13
Global IP Telecommunications
Phone
Use dial plan:
Enable "dial plan" if you want to use it or select "dialnum".
Dial number:
Please enter prefix for using "dial number".
City code (ddd code)
Enter city code. E.g. 69 for Frankfurt/Germany or a three digits city
code like 212 for calling New York/USA.
Country code:
Enter country code. E.g. 49 for Germany or 1 for USA.
International exit
code:
Enter the exit code for international calling. E.g. 00 for Germany.
National exit code:
Enter national exit code. E.g. 0 in Germany.
Local prefix:
Enable, disable or omit local prefix
Non local prefix:
Enter your non local prefix.
Use dial plan:
Check "use dial plan" if you want to enable the service.
Phone number to forward
to:
Enter the phone number you want incomming calls to be diverted to.
Ring type:
Select ring tone or mute speaker for incomming call indication.
Time to answer:
Enter a number from 0 to 60 to set the entries of seconds before phone
answers or forwards the call. If you want to disable auto answer or forwarding,
please set this parameter to 0.
If power off:
Divert calls if phone is switched off.
On no answer:
Divert calls if no answer.
Always:
Divert directly.
If bussy:
Divert calls if bussy.
Audio
Codec 1...5:
Select codecs and set priority by sorting from preferred to 4th alternative..
Number of audio frames: With G.723 selected, please enter 2. If using G.729, please enter 1.
VAD
Enable/disable voice activity detection by checking/unchecking this
option.
AGC
Enable/disable automatic gain control by checking/unchecking this
option.
AEC
Enable/disable acoustic echo cancellation
G.723.1 high data
rate
Enable if G.723.1 is enbaled.
Microphone
Set microphone volume. (max. 15)
Handset speaker:
Set handset speaker volume. (max. 31)
Speaker:
Set speaker volume. (max. 31)
PWD/Time
Password:
AGC ein- und ausschalten.
Password repetition:
VEC ein- und ausschalten.
Supper password:
Mirkrofonlautstärke am Hörer einrichten.
Supper
password
rep
etit
ion
:
Lautstärke am Hörer einrichten.
DEBUG mode:
Einrichten der Lautstärke für die Freisprechfunktion.