Global A-Series Скачать руководство пользователя страница 10

Страница: 10 / 40

Section 2 Unpacking Instructions

2-1

WARNING

FAILURE TO FOLLOW THESE INSTRUCTIONS WILL RESULT IN DAMAGE TO THIS

SYSTEM OR POSSIBLE INJURY (RECEIVER’S RESPONSIBILITY).

WARNING

THE PLASTIC BANDS WILL SPRING APART WHEN CUT ON THE SHIPPING BOX.

ENSURE THEY WILL NOT HIT ANYONE OR ANYTHING. EYE PROTECTION SHOULD

BE WORN WHEN REMOVING THE PLASTIC BANDS. WATCH FOR SHARP EDGES.

CAUTION

Contents are fragile and should be removed carefully.

CAUTION

Some of the parts may be damaged by knives, open boxes carefully.

CAUTION

After opening boxes check the serial numbers of the optics against the packing slip.

CAUTION

Open boxes containing the optics over a table or counter.

CAUTION

When handling the optics do not touch the glass with your fingers.

NOTICE

Check for damage before discarding the shipping material and notify Global Surgical

Customer Service if shipping damage is observed.

NOTICE

Contents are packed in several boxes. Before discarding any packaging ensure no

components are still within.

NOTICE

Save this manual for future reference.

NOTICE

If you have ordered accessories, then some of these may be assembled to the unit while

others are supplied unassembled. Please examine the content of the box thoroughly. If any

accessories require assembly then instructions will be included.

All shipping materials should be retained until it has been determined that the unit was not damaged

during shipment.

If damage is discovered, complete the following:

1. Do not refuse shipment.

2. Make a notation on the delivery receipt and inspect the carton for damage.

3. Take pictures of damage to the equipment and to the packaging (if evident).

4. If damage is discovered, leave in original container and request immediate inspection from the carrier

within 3 days.

5. Contact the Global Surgical Customer Service Department at 1-800-861-3610.

If the product is damaged electrically or mechanically and in the event the original packing materials are no

longer available, contact Global Surgical Technical Services Department.

Refer to Section 8 of this manual regarding Technical Service contact information and proceed as instructed.

Содержание A-Series









































Результаты поиска

Содержание A-Series

Отзывы:

Бренды по названию

Популярные бренды

Global A-Series, Руководство пользователя

Результаты поиска

Содержание A-Series

Отзывы:

Бренды по названию

Популярные бренды