Global 761221 Скачать руководство пользователя страница 5

Страница: 5 / 13

Instruction Manual

INSTALLATION

• It is recommended that 2 or more people install this unit.

• This fountain must be mounted on a solid, flat surface with adequate strength (concrete

pad recommended) capable of supporting 450 lbs.

• Locate and install plumbing through ground as required. Refer to Rough-In Guide (page 4)

for proper location and correct plumbing.

• Install a drainable shut-off valve (not included) if in a freezable environment.

• Installation of a trap on the water drain line may be necessary; check local plumbing codes.

WARNING:

The fountain is rated for inlet water pressure of 20-105 PSI. A pressure reducing

regulator should be used if the inlet water supply exceeds 105 PSI. Any damage caused by

reason of connecting this product to supply line pressure higher than 105 PSI will void warranty.

1. REMOVE ACCESS PANELS

To gain access to the drain and water line connections, remove all access panels detailed below

using the provided torx key wrench (H1) or torx drill bit (H2) to remove all (40) M6 x 10

flat-head anti-theft screws on back side of the bottle filler and pedestal, as well as the underside

of the drinking fountain and pet station pans:

Flat-head anti-theft screw

M6 x 10 (qty 40)

REMOVE

Outdoor Bi-Level Drinking Fountain

w/ Bottle Filler & Pet Station

Содержание 761221














Результаты поиска

Содержание 761221

Отзывы:

Похожие инструкции для 761221

Бренды по названию

Популярные бренды

Global 761221, Инструкция по эксплуатации

Результаты поиска

Содержание 761221

Отзывы:

Похожие инструкции для 761221

Бренды по названию

Популярные бренды