Global 761221 Скачать руководство пользователя страница 1

Страница: 1 / 13

globalindustrial.ca

Distribucion Industrial Globales S DE RL DE CF

Instruction Manual

Manual de Instrucciones

Manuel d'instruction

Customer Service

US: 1-800-645-2986

Servicio de atención al Cliente

México: 01.800.681.6940

Service à la clientèle

Canada: 888-645-2986

Outdoor Bi-Level Drinking Fountain

w/ Bottle Filler & Pet Station

Models 761221, 761221BK,

761221BL & 761221GN

• All installation work must be performed by authorized

service personnel.

• Two or more people are recommended to lift and

install the unit.

• To avoid the risk of property damage and/or personal

injury, ensure the mounting surface is adequate to support

450 lbs.

• Check local codes for plumbing requirements prior

to installation.

• Refer to Rough-In Guide (page 4) prior to installation.

• Thoroughly flush all water supply lines of all foreign

matter before connecting to the fixture.

• Check for any leaks before use.

• DO NOT attempt to repair or replace any part of this

fountain unless it is specifically recommended in this

manual. All other services should be referred to a

qualified technician.

• For use with clean, clear potable drinking water only.

• Shut-off water supply during installation to reduce the

risk of water damage.

• Freezing Caution: Before freezing temperatures occur,

refer to the Draining and W

interization section of this

manual (page 13) for proper preparation.

• Installation of a trap on the water drain line may be

necessary; remove trap before winterization draining.

• Failure to follow safety warnings and/or

installation instructions will void warranty.

WARNING

Note:

This unit is designed to be installed on the surface of an existing or new concrete slab.

Included are the necessary vandal-resistant stainless steel bolts and washers needed

to anchor this unit. Installer must provide a 1-1/2” PVC drain line (if applicable) and water supply

line. All connections are made inside the item through the access doors, as shown in the drawings.

It is recommended to install a shut-off valve (not included) on the water supply.

Содержание 761221














Результаты поиска

Содержание 761221

Отзывы:

Похожие инструкции для 761221

Бренды по названию

Популярные бренды

Global 761221, Инструкция по эксплуатации

Результаты поиска

Содержание 761221

Отзывы:

Похожие инструкции для 761221

Бренды по названию

Популярные бренды