HOW TO ASSEMBLE THE GLOBAL INDUSTRIAL VACUUM
A Unpack The Enclosed Packet
Enclosed in a packet are two nut and bolts
for the handle and one upper (larger) and
lower (smaller) plastic cord hooks. An extra
drive belt is included.
B Assemble Handle
Place lower handle into the handle
socket. Take upper handle and slide
on top of lower handle. Make sure
holes align for nut and bolts. Make
sure upper handle curves towards
back of vacuum cleaner. Insert nut
and bolts and tighten.
C Upper Cord Hook And Lower Cord Hook Assembly
Take lower cord hook with vacuum facing frontwards and snap into slot on
lower handle with hook facing down. Make sure cord is in cord slot before
clip is snapped in. Take upper cord hook and place cord with spring retainer
into slot and snap in. Wrap cord around cord clips.
1. Place Inner tab
into slot
2. Press hook
around handle
3. SNAP opposite inner
tab into place
BAG
SUPPORT
HOOK
spring
upper handle
cloth bag
lower handle
lower clip
upper clip
B
A
D
C
2